If your MACH V1 vacuum cleaner's clean water tank is leaking, please try the following troubleshooting steps to verify if the issue can be resolved:


  • Check whether the water level exceeds the maximum limit. Also, please check if there are water stains on the water tank surface and use a clean cloth to wipe it dry.

A picture containing indoor, kitchenware

Description automatically generated

  • Check if the clean water tank is installed properly. Please make sure the water outlet is aligned with the connector of the vacuum cleaner.

  • Remove the water tank and check if the rubber cover on the water tank is installed properly. The surface should be smooth if the rubber cover is completely sealed.

A picture containing dirty

Description automatically generated

  • Reinstall the clean water tank. The clean water tank will make a clicking sound when it is properly installed and locked in place.
  • Power on the vacuum cleaner and check whether the clean water tank is still leaking water.


If you have any further questions, please contact MyAnker Support team for assistance.